Strong Acid Cation

Strong Acid Cation
Strong Acid Cation Strong Acid Cation

Strong Acid Cation

Strong Acid Cation Exchange Resin (Model No.C100E)
Equivalence:Lewatit S100LF/S80,Dowex HCR-S,Purolite C100E,Amberlite IR100, Tulsion T40
 
C100E is a GEL Type Strong Acid Cation Exchange Resin having 7% cross linked polystyrene matrix with sulphonic acid as a functional group. The resin has good operational capacity under various raw water quality. It also provides better physical stability. The resin is supplied with standard beads size distribution to give optimum operating capacity with minimum leakages of ions and also minimum pressure drop across the resin bed. The resin is available in both Na+ and H+ form.
 
C100E is also available with varied particle size to match specific requirement, under different grades, the details are available with our technical service department.
 

PROPERTIES
Matrix Cross linked polystyrene
Functional Group SO3 Sulfonic
Ionic Form Na﹢Sodium
Physical Form Hard moist beads
Particle size (mm) 0.315-1.25
Moisture content % 47-53 Na+ form
Total Exchange Capacity (Min) eq/ltr
                     (Min)mmol/g
1.9 Na+form
4.5 Na+form
Bulk density or shipping weight gms/ltr Na+form 770-870
Operating pH range 0-14
Solubility in common solvents Insoluble
Operating Temperature℃(max) 120
Volume change% (max):Na+to H+ 10

 
 

SUGGESTED OPERATING CONDITIONS
Bed Depth Meter 1.0-3.0
Regenerant Concentration % 4-10 NaCl
2-5 HCl
2-4 H2SO4
Regenerant Flow Rate Meter/Hour 5-8
Regenerant Contact Time Minutes 30-60
Regeneration Level 100% Kgs/m3 of resins 75-150 NaCl
40-100 HCl
75-150 H2SO4
Rinse Flow Rate Meter/Hour 10-20
Rinse Time Minutes 30
Running Flow Rate Meter/Hour 10-40

 
APPLICATIONS: C100E (Na+) is generally used for softening application. The resin has excellent physical strength and is highly resistant to osmotic shocks. C100E (H+) is generally used for demineralization application, and it gives very low level of Sodium leakages. For demineralization application C100E is recommended to get high purity water depending on the raw water quality. In polishing units the MB grade of C100E along with MB grade of A600 is recommended for mixed bed units to obtain high purity of water required for high pressure boiler and steam generator.
 

Super Sack 1000Liters
PP/PE Bag 25Liters
PP/PE Bag 25Kgs




CAUTION: Strong oxidizing agents like nitric acid can cause explosive type reaction, when mixed with Ion Exchange resins. Knowledgeable sources should be consulted in the handling of this material.
 
NOTE: Ion Exchange Resins are sold on a volume basis, but are packed and shipped by weight. The shipping weight for each resin is fixed & does not take into consideration the variations in density and moisture content allowed within the product specifications. Therefore although the weight of the material is constant, there may be slight variations in volume, reflecting batch to batch variation of density and moisture content.
 
STORAGE CONDITIONS: The resin supplied in drums or bags should be stored in cool shed (warehouse) away from direct sunlight & should be periodically damped down with clean water. 

Prev:end Next:end

Contact Us

Rm 606,A2 Building,No. 55 Changshan Road,Jiangyin,Jiangsu,China. E-mail:sales@widevision-china.com

Other Business